A thorough procedure for using the Face Access Control system is described in this tutorial. Find out how to create a fresh face profile for every unit. Find out how to fix registration issues and activate and deactivate face access. Examine the security measures used to safeguard biometric information. The management of Face Access Control is explained in this lesson. To provide each unit with easy and safe access, create a new face profile.

This tutorial offers a thorough process for using the VYROX VIP Smart AIoT Devices, created by VYROX INTERNATIONAL SDN BHD, to optimise and improve building and facility operations. Property managers, building administrators, and facility operators may easily connect and operate the Face Access Control system with the help of VYROX's VIP AIoT tools, a full suite of intelligent solutions. These AIoT devices provide for improved security, more operational efficiency, and more intelligent decision-making by integrating hardware and software into a single, cohesive platform.

Go to Setting > AIoT Devices > SuperPAss-Face

Details include:

1. SuperPass-Face Controller Name
2. Access Direction
3. Server IP
4. Server Port
5. Username & Password

Step 1:

Fill in blank “SuperPass-Face Controller Name”

Step 2:

Select “Access Direction”

Step 3:

Fill in the Blank “Server IP & Server Port”

Step 4: Fill in the blank “Username & Password”.

After done keying in all information, Click “Add”

This guide shows you step-by-step how to set up the Properties Unit part of VYROX VIP Smart Integrated Property Management System, which was created by VYROX INTERNATIONAL SDN BHD. Property managers, building officials, and facility workers can make and handle each unit, making sure that the information about each unit is always correct. Then, each unit can be easily connected to access control modules like SuperPass-Door for door entry, SuperPass-Lift for lift access, and UltraPass Face for face recognition. This way, unit records can be directly linked to automated and safe access permits.

Go to Properties > Units > Three Lines in the box.

Step 1

Tick, “Default UltraPASS-Face Settings for Main and Sub User Accounts”

Note: Please tick which one the unit uses for door access.

Go to Setting > AIoT Devices > SuperPAss-Door

Details include:

1. SuperPass-Door Controller Name
2. Number of Doors Supported
3. Label Name in Channel
4. Cloud Server
5. Cloud Server API Key
6. SuperPASS-Door Controller Serial Number

Step 1:

Fill in the blank. “SuperPass-Door Controller Name”

Step 2:

Select “Number of Doors Supported”

Step 3:

Fill in the Blank “Label Name in Channel”

Step 4: Tick Cloud Server and Fill in the blank “Cloud Server API Key & SuperPASS-Door Controller Serial Number”.

After done keying in all information, Click “Add”

Go to Setting > AIoT Devices > SuperPAss-Lift

Details include:

1. SuperPass-Lift Controller Name
2. Number of Level Supported
3. Label Name in Channel
4. Cloud Server
5. Cloud Server API Key
6. SuperPASS-Lift Controller Serial Number

Step 1:

Fill in blank “SuperPass-Lift Controller Name”

Step 2:

Select “Number of Level Supported”

Step 3:

Fill in the Blank “Label Name in Channel”

Step 4: Tick Cloud Server and Fill in the blank “Cloud Server API Key & SuperPASS-Door Controller Serial Number”.

After done keying in all information, Click “Add”