This guide outlines a detailed process for using the add-on access cards. Discover the process for requesting a new card and register them for each unit. Learn how to activate and deactivate access cards and fix registration difficulties. Learn the security methods that protect access card data. This tutorial explains how to add access cards. Request a fresh card to register access cards for each unit.

Residents and approved workers can use a card for condominium entry to get into the building or certain areas. You can use these card accesses instead of keys or fobs, making things easier, safer, and easier to monitor. Card access systems can limit access to lifts, parking lots, and other restricted areas, granting entry only to those who have received approval. Many places use security methods like tracking records and limiting entry based on time.

Go to Card Access > New Card Access > Fill in details > Add

Step 1:

Details include:

1. Select category
2. Category Type
3. Select Tower/Block
4. Tower/Block Type
5. Select Level
6. Level Type
7. Select Unit
8. Unit Type
9. select account

Please complete the information by clicking the “Select” icon once you have finished.

Step 2:

Please provide the following details:

1. Customer Account Holder
2. Card Access Type
3. Physical Card Number 1
4. Physical Card Number 2
5. Remarks.
6. Add

Step 3:

For your information, you must get a card number from management in order to add an access card.

Copy and paste the subsequent command: - for example

1. Card Number A-G-1-C1 for Physical Card Number 1 (MIFARE Card)
2. Card Number A-G-1-UHF1 for Physical Card Number 2 (Ultra High Frequency UHF Card)

Step 4:

A remark is utilised when each unit possesses two access cards, so please make remarks as instructed.

Please provide a comment if you are referring to card 2. This will assist us in confirming that we are addressing the accurate information and preventing any misunderstandings.

Step 5:

After this, management needs to approve card access by going to Pending Approval page and clicking Approve to approve card access.

Please repeat Steps 1 through 5 to finish the subsequent access card. After Step 5 is finished, confirm that all the data is correct and legibly clear before turning in the access card for processing. To avoid any delays in the activation process, kindly make sure that all material is carefully checked for any mistakes or omissions. Following every stage carefully is crucial to ensure the access card is processed correctly. Unclear knowledge or mistakes might cause delays or activation issues. Examining the material carefully before submission helps one to prevent any potential activation process delays.

And please don't delete it if you write it wrong; just make sure to edit it first!

This tutorial offers a thorough process for using the VYROX VIP Smart AIoT Devices, created by VYROX INTERNATIONAL SDN BHD, to optimise and improve building and facility operations. Property managers, building administrators, and facility operators may easily connect and operate several systems, including SuperPass-Door and SuperPass-Lift, with the help of VYROX's VIP AIoT tools, a full suite of intelligent solutions. These AIoT devices provide for improved security, more operational efficiency, and more intelligent decision-making by integrating hardware and software into a single, cohesive platform.

Go to Setting > AIoT Devices > SuperPAss-Door

Details include:

1. SuperPass-Door Controller Name
2. Number of Doors Supported
3. Label Name in Channel
4. Cloud Server
5. Cloud Server API Key
6. SuperPASS-Door Controller Serial Number

Step 1:

Fill in the blank. “SuperPass-Door Controller Name”

Step 2:

Select “Number of Doors Supported”

Step 3:

Fill in the Blank “Label Name in Channel”

Step 4: Tick Cloud Server and Fill in the blank “Cloud Server API Key & SuperPASS-Door Controller Serial Number”.

After done keying in all information, Click “Add”

Go to Setting > AIoT Devices > SuperPAss-Lift

Details include:

1. SuperPass-Lift Controller Name
2. Number of Level Supported
3. Label Name in Channel
4. Cloud Server
5. Cloud Server API Key
6. SuperPASS-Lift Controller Serial Number

Step 1:

Fill in blank “SuperPass-Lift Controller Name”

Step 2:

Select “Number of Level Supported”

Step 3:

Fill in the Blank “Label Name in Channel”

Step 4: Tick Cloud Server and Fill in the blank “Cloud Server API Key & SuperPASS-Door Controller Serial Number”.

After done keying in all information, Click “Add”

This guide shows you step-by-step how to set up the Properties Unit part of the VYROX VIP Smart Integrated Property Management System, which was created by VYROX INTERNATIONAL SDN BHD. Property managers, building officials, and facility workers can make and handle each unit, making sure that the information about each unit is always correct. Then, each unit can be easily connected to access control modules like SuperPass-Door for door entry and SuperPass-Lift for lift access. This way, records from each unit can be directly linked to automatic and safe access permits.

Go to Properties > Units > Three Lines in the box.

Details include:

1. The Floor(s) Where This Property Is Situated
2. Default SuperPASS-Door Settings for Main and Sub User Accounts
3. Default SuperPASS-Lift Settings for Main and Sub User Accounts

Step 1

Tick and select, “The Floor(s) Where This Property Is Situated”

Note: Please tick according to the following unit-level floor and block.

Step 2

Tick and select, “Default SuperPASS-Door Settings for Main and Sub User Accounts”

Note: Please tick which one the unit uses for door access.

Step 3

Tick and select, “Default SuperPASS-Lift Settings for Main and Sub User Accounts”

Note: Please tick according to the following unit-level floor and block.

QUESTION 1

What steps should be taken if a mistake is made in writing after receiving approval?

Procedures:

1. Card Access
2. Click on the card access account and select the right three lines in the box.
3. Choose the edit

Additionally, the procedures are the same for the pending approval area.

QUESTION 2

What actions should I take in the event that a caution symbol appears?

Step 1: Click the Caution Symbol.

Step 2: Click the Sync Now