VYROX Apps · PlanTask88, InstaClaim, AI Doctor and POS Printer Connector: App Guides

Starting and Completing a Task

VYROX Wiki · Updated 23 September 2026 · https://www.vyrox.com/wiki/plantask88-start-and-complete-tasks

A task in PlanTask88 is one visit to one project: you start it when you arrive on site and mark it completed when the work is done, and PlanTask88 records the times, your GPS position, your distance from the project and any photo or note at both ends. This guide is for technicians and anyone who checks in and out of jobs.

Before You Start

A plan that includes the project must exist in your account. See Creating and Managing Plans. If you have no plans, PlanTask88 says "Create a plan first" and opens Plans.
Allow location access for PlanTask88 in your browser and turn on your phone's location.
Allow camera access if you will take proof photos.
You can have only one task in progress at a time.

Start a Task

Press Start New Task on the Dashboard or Tasks tab, or Start Task on a plan.
1 Plan: tap Choose a plan… and pick the plan from the searchable list.
2 Project: if the plan has more than one project, tap the project you are at. With one project it is chosen for you.
3 System type: if the project has more than one system type, tap one.
4 Task type: if the project has more than one task type, tap one.
Wait while the card shows Locating you…. PlanTask88 then shows your distance from the project.
Optionally take a Proof photo by tapping Take a photo, and type a Description such as "Replaced faulty DVR power supply".
Press Start Task. PlanTask88 shows "Task started" and returns to the Dashboard with your timer running.

The Location Check

Card Shows	What It Means	What You Must Do
You're on site ... m away / Within the ... m allowed range	You are inside the allowed radius.	Nothing. A photo is optional.
... m from project, outside ... m radius	You are too far from the project's saved position.	Attach a proof photo. Start Task stays disabled until you do.
Could not get your location	GPS failed or was blocked.	Press Retry, or attach a proof photo to continue.
No GPS coordinates for this project	The project has no map position saved.	Attach a proof photo. Ask an admin to set the project's location.

The allowed radius is set by your admin (200 metres by default). A task started or completed outside it is tagged Out of range and counted as flagged in reports.

Proof Photos

Tap the photo tile. Your phone's camera opens.
Take the photo. A preview appears in the tile.
To replace it, press the cross on the preview and take another.

PlanTask88 shrinks large photos before uploading so they send quickly on a weak connection. Photos are accepted in JPEG, PNG, WebP and HEIC formats.

Mark a Task Completed

Press Mark Completed on your task card on the Dashboard, or open the task in Tasks and press Mark Completed.
Mark Task Completed opens with the project and work type at the top.
Wait for the location check. The same rules apply as when starting.
Take a Proof photo if required or useful, and add a Description such as the work done or parts used.
Press Mark Completed. PlanTask88 shows "Task completed".

The task now shows as completed with its end time and duration.

Fields Recorded

Field	When	Example
Start time and end time	On Start Task and Mark Completed.	05 Oct 2026, 09:12
Location	Coordinates at start and end, with a map link.	3.1390, 101.6869
Distance	Metres from the project at start and end.	45 m
Start photo / End photo	When you attach one.	Photo of the equipment
Start note / End note	The Description you typed.	Replaced faulty DVR power supply
Duration	Worked out from start and end.	1h 25m

Frequently Asked Questions

It Says I Already Have a Task in Progress. Why?

Only one task can run at a time. Go to the Dashboard and press Mark Completed on the running task first.

My Connection Dropped After I Pressed Start Task. Did It Save?

Press Start Task again. If the first attempt reached the server, PlanTask88 says "That task was already started" and shows the running task instead of creating a second one.

Can I Start a Task Without GPS?

Yes, by attaching a proof photo. The task is marked out of range so your supervisor can review it.

I Forgot to Mark a Task Completed. What Happens?

After the limit your admin sets (12 hours by default) the task card turns red. If still not completed, PlanTask88 closes it automatically at the limit and marks it Auto-closed · not verified. Tell your admin so they can correct the end time.

Can I Delete a Wrong Task Myself?

No. Only admins can edit or delete tasks. Ask your admin to correct it.