Differences

This shows you the differences between two versions of the page.

--- card_access [2025/04/14 09:30] – jimmy
+++ card_access [2025/08/25 03:37] (current) – jimmy
@@ Line 5: / Line 5: @@
 ===== 2. Card Access =====
-Residents and approved workers can use a card for condominium entry to get into the building or certain areas. You can use these card accesses instead of keys or fobs, making things easier, safer, and easier to monitor. Card access systems have the ability to limit access to lifts, parking lots, and other restricted areas, granting entry only to those who have received approval. Many places use security methods like tracking records and limiting entry based on time.
+Residents and approved workers can use a card for condominium entry to get into the building or certain areas. You can use these card accesses instead of keys or fobs, making things easier, safer, and easier to monitor. Card access systems can limit access to lifts, parking lots, and other restricted areas, granting entry only to those who have received approval. Many places use security methods like tracking records and limiting entry based on time.
 ==== 2.1 Add New Card Access ====
 Go to **Card Access > New Card Access > Fill in details > Add **
-|  {{ :card_access_1.svg |}}  |
+{{ :card_access_1.svg }}
-|  {{ :card_access_2.svg |}}  |
+{{ :card_access_2.svg }}
 **Step 1:**
@@ Line 26: / Line 26: @@
   - select account
-|  {{ :card_access_3.svg |}}  |
+{{ :card_access_3.svg }}
 Please complete the information by clicking the "Select" icon once you have finished.
@@ Line 40: / Line 40: @@
   - Add
-|  {{ :card_access_4.svg |}}  |
+{{ :card_access_4.svg }}
-|  {{ :card_access_5.svg |}}  |
+{{ :card_access_5.svg }}
 **Step 3:**
@@ Line 47: / Line 47: @@
 For your information, you must get a card number from management in order to add an access card.
-|  {{ :card_access_6.svg |}}  | |  {{ :card_access_7.svg |}}   |
+{{ :card_access_6.svg }}
+{{ :card_access_7.svg }}
 Copy and paste the subsequent command: - for example
@@ Line 53: / Line 54: @@
   - Card Number A-G-1-UHF1 for Physical Card Number 2 (Ultra High Frequency UHF Card)
-|  {{ :card_access_8.svg |}}   | |  {{ :card_access_9.svg |}}   |
+{{ :card_access_8.svg }}
+{{ :card_access_9.svg }}
 **Step 4:**
-Remark is utilised when each unit possesses two access cards, so please make remarks as instructed.
+A remark is utilised when each unit possesses two access cards, so please make remarks as instructed.
-|  {{ :card_access_10.svg |}}   |
+{{ :card_access_10.svg }}
 Please provide a comment if you are referring to card 2. This will assist us in confirming that we are addressing the accurate information and preventing any misunderstandings.
 **Step 5:**
@@ Line 73: / Line 75: @@
 **And please don't delete it if you write it wrong; just make sure to edit it first!**
-===== QnA =====
+===== 3. CONFIGURATION INSTRUCTIONS FOR PROPERTIES =====
+This guide shows you step-by-step how to set up the Properties Unit part of the VYROX VIP Smart Integrated Property Management System, which was created by VYROX INTERNATIONAL SDN BHD.  Property managers, building officials, and facility workers can make and handle each unit, making sure that the information about each unit is always correct.  Then, each unit can be easily connected to access control modules like SuperPass-Door for door entry and SuperPass-Lift for lift access. This way, records from each unit can be directly linked to automatic and safe access permits.
+==== 3.1 Configuration Properties ====
+Go to **Properties > Units**
+**PIC**
+Details include:
+  - The Floor(s) Where This Property Is Situated
+  - Default SuperPASS-Door Settings for Main and Sub User Accounts
+  - Default SuperPASS-Lift Settings for Main and Sub User Accounts
+**Step 1**
+Tick, “The Floor(s) Where This Property Is Situated”
+**PIC**
+**Note: Please tick to follow the unit-level floor and block.**
+**Step 2**
+Tick, “Default SuperPASS-Door Settings for Main and Sub User Accounts”
+**PIC**
+**Note: Please tick which one the unit uses for door access.**
+===== Q&A =====
+**QUESTION 1**
 **What steps should be taken if a mistake is made in writing after receiving approval?**
-Procedures :
+Procedures:
   - Card Access
   - Click on the card access account and select the right three lines in the box.
   - Choose the edit
-|  {{ :card_access_12.svg |}}  |
+{{ :card_access_12.svg }}
 Additionally, the procedures are the **same** for the pending approval area.
+**QUESTION 2**
+**What actions should I take in the event that a caution symbol appears?**
+Step 1: Click the **Caution Symbol**.
+{{ :card_access_qna1.svg }}
+Step 2: Click the **Sync Now**
+{{ :card_access_qna2.svg }}