Skip to content
← Back to Guide On-Site Tasks

CountServa · CountServa: Accounting and ERP Manual

On-Site Tasks

VYROX Wiki · Updated 17 November 2026 · https://www.vyrox.com/wiki/countserva-on-site-tasks

On-Site Tasks in CountServa let field staff plan site visits, start and end each task on their phone, and let managers see hours by person and project. It is used by contractors and service teams.

What It Does

  • Staff write a plan listing the sites and allowed work for a day.
  • Start Task and End Task record time and phone location.
  • Tasks away from the site are flagged Start Off-Site or End Off-Site.
  • A photo is asked for when the site has no location or you are too far away.
  • Managers get Attendance, Project Labour and Timesheet views.

Important

Hours here are records only. They do not change payroll, payslips or the ledger.

Start and End a Task

  1. Open On-Site Tasks.
  2. Press New Plan, pick the Date and tick the sites. Press Save Plan.
  3. Press Start Task and choose the plan, site and task type.
  4. Allow location access, take a photo if asked, and confirm.
  5. When done, press End Task.

Statuses are In Progress, Completed and Auto-Closed. A forgotten task is closed automatically after the set time.

Set Up (Administrators)

Administrators open Accounting > Planning > On-Site Tasks, then the Setup tab.

  1. Press New Site, pick the Project and enter the Site Name and Address.
  2. Add the location, or press Use My Current Location.
  3. Leave the location empty for a site with no fixed place. Every start and end then needs a photo.
  4. Under Rules, set Allowed Distance (m) and Auto-Close After (Minutes).
  5. Manage task types in the same tab.
TabShows
All TasksEvery staff task
AttendanceFirst start and last end per person per day
Project LabourCapped field hours per project
TimesheetField hours per day for a month

Frequently Asked Questions

Why was my task flagged Off-Site?

Your phone was farther from the site than the allowed distance when you started or ended.

Can I stop a forgotten task from inflating hours?

Yes. Hours are capped per task, and Auto-Close After (Minutes) closes it.

Related Guides

  • Service Reports
  • Payroll
  • Users and Roles